Langen/Germany, 04. August, 2020 --- Scientists at Tokyo Institute of Technology and Socionext Inc. have developed a novel transceiver for enabling seamless communication between earth ground platforms and satellites in the low, middle, and geostationary earth orbits. Among other things, this transceiver could bring the Internet to people in remote rural areas and at sea.
We live in the information age, where communications technologies have reached unprecedented levels of advancement. Yet, bringing connectivity to remote locations, such as rural areas or the open sea, remains difficult. Satellite communication (SATCOM) is an attractive option for providing data links to such places; but for effective SATCOM, the right equipment must exist both in space and here on Earth.
At the forefront of research to achieve superior SATCOM are scientists from Prof Kenichi Okada’s lab at Tokyo Institute of Technology (Tokyo Tech), who have developed a novel transceiver  for SATCOM using standard CMOS  technology. This transceiver operates in the ‘Ka band’, which, for SATCOM, means a 27–31 GHz frequency range for uplink (ground to satellite) and 17–21 GHz range for downlink (satellite to ground).
Their design carries a variety of features that make it stand out from the competition. On the transmitter (TX) side, a high-quality-factor transformer is employed to achieve efficient power use and high linearity in transmission, which results in lower distortion during transmission. The receiver (RX) side features a dual-channel architecture that unlocks several capabilities.
First, having two RX channels allows for receiving signals from two satellites simultaneously. These signals are received in parallel using either two independent polarization modes or two different frequencies. In addition, the proposed design can perform adjacent-channel interference cancellation; that is, the ‘contamination’ on a signal received in one channel by another signal on an adjacent frequency band is eliminated using information received at the other channel. This strategy increases the dynamic range of the system, thus allowing it to operate correctly even in less-than-ideal scenarios with stronger noise and interference.
Both the TX and RX perform direct conversion of a signal; that is, the TX directly converts a baseband signal  into a modulated signal  and the RX performs the inverse process without additional intermediate frequency conversions, unlike the more commonly used superheterodyne receivers. This makes the overall complexity, size, and power consumption of the transceiver considerably lower.
The scientists created a prototype chip to test the actual performance of their design when using all the modulation schemes regulated by the SATCOM DVB-S2X standard. This includes high-order modulation techniques like 64 APSK  and 256 APSK, which provide fast data rates.
The performance test results are very promising, especially when compared with other existing SATCOM transceivers, putting this developed novel design on the map. Prof Okada remarks, “Our paper presents the first Ka-band SATCOM transceiver implemented using standard CMOS technology and designed for an earth ground platform communication with geostationary and low Earth orbit satellites.”
These orbits are at 35,786 km and 200–2,000 km, respectively. Communicating with satellites that far away from a 3 mm by 3 mm chip is certainly no simple feat.
For years, Prof Okada’s lab has been developing various types of state-of-the-art transceivers for next-generation technology, including 5G applications, Internet-of-Things-enabled devices, and low-power Bluetooth communications. This latest transceiver is another piece in the puzzle of enabling seamless worldwide connectedness. “Satellite communication has become a key technology for providing interactive TV and broadband internet services in low-density rural areas. Implementing Ka-band communications using silicon - CMOS technology in particular - is a promising solution owing to the potential for global coverage at low cost and using the wide available bandwidth,” Prof Okada says.
Let us hope that the efforts of these Tokyo Tech researchers help more people benefit from instant communication in the current information era.
 Transceiver: A device capable of transmitting and receiving signals
 CMOS: Complementary metal-oxide-semiconductor; a modern type of fabrication process for transistors widely used for highly integrated circuitry
 Baseband signal: A signal in its ‘pure’ form at its original frequency, without modulation
 Modulated signal: An encoded signal that carries all the information of a baseband signal, usually at a higher frequency so as to make it easier to transmit
 APSK: Amplitude and phase shift keying; a modulation technique where a baseband signal is encoded in both the phase and amplitude of a carrier signal
Yun Wang1, Dongwon You1, Xi Fu1, Takeshi Nakamura1, Ashbir Aviat Fadila1, Teruki Someya1, Atsuhiro Kawaguchi1, Jian Pang1, Kiyoshi Yanagisawa1, Bangan Liu1, Yuncheng Zhang1, Haosheng Zhang1, Rui Wu1, Atsushi Shirane1, Shunichiro Masaki2, Daisuke Yamazaki2, Kenichi Okada1
Title of original paper:
A CMOS Ka-Band SATCOM Transceiver with ACI-Cancellation
Enhanced Dual-Channel Low-NF Wide-Dynamic-Range RX and
IEEE Radio Frequency Integrated Circuits Symposium 2020 — RFIC2020
1Department of Electrical and Electronic Engineering, Tokyo Institute of Technology
*Corresponding author’s email: email@example.com
Figure 1. Prototype of the SATCOM transceiver and its power consumption characteristics
The test chip only measures 3 mm by 3 mm.
View larger image
Public Relations Group,
Tokyo Institute of Technology
About Tokyo Institute of Technology
Tokyo Tech stands at the forefront of research and higher education as the leading university for science and technology in Japan. Tokyo Tech researchers excel in fields ranging from materials science to biology, computer science, and physics. Founded in 1881, Tokyo Tech hosts over 10,000 undergraduate and graduate students per year, who develop into scientific leaders and some of the most sought-after engineers in industry. Embodying the Japanese philosophy of ‘monotsukuri’, meaning ‘technical ingenuity and innovation’, the Tokyo Tech community strives to contribute to society through high-impact research.
Socionext is a global, innovative enterprise that designs, develops and delivers System-on-Chip solutions to customers worldwide. The company is focused on technologies that drive today?s leading-edge applications in consumer, automotive and industrial markets. Socionext combines world-class expertise, experience, and an extensive IP portfolio to provide exceptional solutions and ensure a better quality of experience for customers. Founded in 2015, Socionext Inc. is headquartered in Yokohama, and has offices in Japan, Asia, United States and Europe to lead its product development and sales activities. For more information, visit www.socionext.com.